Fits in all CIS Master Stations

Including P3100, P3101 and P3102

Additional piggyback PCB to expand the external signal control outputs for substation lines 5-8

• Control of additional 4 x substations with signal devices
• Expansion of external signal device control - Substations 5-8
• Suitable for substation types: P-9003, P-9016, P-9135

Installation Procedure:

The PCB 97301-009 is mounted piggyback on top of the units main PCB. The PCB is equipped with two male single row connectors on each side. A 21 pin version on the left side a 17 pin version on the right side.

The CIS P-3100/P-3101/3102 is fitted with female connectors on the main PCB for direct fitting of the piggyback PCB

Mounting Procedure:

• Remove the rear cover of the unit
• Replace the upper right spacer above the main PCB (screw terminals downwards) with the 15mm spacer from the mounting kit.
• Mount the PCB 97301-009 piggyback on the single row connectors on the main PCB. The upper left spacer shall be inside the free hole on the PCB 97301-009.
• Fasten the PCB with the 20+15 mm (35mm) spacer from the mounting kit
• Add the support bracket on top of the piggyback board to secure the board sandwich
• Replace the rear cover of the unit.